Contact us now for your email@example.com
Standard Configuration: Computer
Long Cell Components
Short Cell Components
Mercury Lamp Components
Sample Boat (Quartz)
Standard Mercury Solution
Arm Manipulator Components
Amalgamation Tube Resistance Wire
Operation Principle:5E-HGT2321 is a direct mercury analyzer based on the U.S. EPA Method 7473. This method eliminates the need of sample preparation.
The process involves drying，combustion and evaporation at high temperatures with air. The gases are carried through a heated catalyst that removes halogens, nitrogen oxides, and sulfur oxides. The remaining dry combustion products including mercury atoms are swept through a gold amalgamation tube. The amalgamation tube captures all of the mercury atoms at low temperature. Then the amalgamation tube is heated to a higher temperature to release mercury as atoms again, mercury atoms mixed into the air for the analysis using cold vapor atomic absorption spectrometer (CVAAS).
Features:Safety FirstDetermine total mercury directly without sample preparation. No hazardous waste produced and no corrosive chemicals used.
Get results in 2-5 minutes. An auto-sampler with as many as 45 sample positions is provided.
Wide Application5E-HGT2321 is able to analyze a variety of sample types including solids and liquid in a wide range of applications.
Just input the sample mass into software and load the sample onto the auto-sampler, 5E-HGT2321 will finish the test automatically.
Minimum Analysis Cost
Compared with the traditional CV-AAS mercury analysis techniques, 5E-HGT2320 saves more than 70% in cost for customers.
All the quartz tubes can be heated, which could effectively remove moisture and eliminate the memory effect of residual mercury.
|Model||5E-HGT2321 Automatic Mercury Analyzer|
|Conforms to Method||US/EPA 7473, ASTM D6722|
|Principle||Sample Thermal Decomposition, Atomic Absorption|
|Instrument control||External PC computer system|
|Sample types||Liquid, Solid, Gas|
|Max. Sample Volume (Liquid)*||1500 µl|
|Max. Sample Weight (Solid)*||1500 mg|
|Light Source||Low pressure mercury lamp|
|Hg wavelength||253.65 nm|
|Detectors||UV enhanced photodiodes (2)|
|Number of samples||45 with small or large boats|
|Detection limit||0.001 ng Hg|
|Working Range||Automatic scale change / Dynamic range 0-1000 ng Hg|
|Repeatability||<1.5 % (1ng Hg)|
|Typical Analysis Time||2-5mins|
| Sample treatment
| Adjustable from
|Calibration||Standard solution or CRM|
|Number of standards||Minimum 2 (blank & high), maximum 33|
|Peak (W) -Energy consumption||<3000W|
|Standby (W)-Energy consumption||<100W|
|Power Supply||AC110/220V, 50/60Hz|
|Dimensions (L x W x H)||763mmx595mmx435 mm|
|*Depend on different sample density|