Contact us now for your email@example.com
Standard Configuration: Computer
Integrated Catalytic Amalgamation Tube
Amalgamation Tube Resistance Wire
Standard Mercury Solution
Arm Manipulator Components
Operation Principle:Sample is dried by heating and burnt (pyrolysis) in oxygen or air. Its decomposed product is oxidized by the high temperature catalyst carried via oxygen. Meanwhile, interferent like halogen, nitric oxides, and sulfur oxides are absorbed by catalyst. Moisture is exhausted by pneumatic truncation, and the rest of decomposed product is further conveyed to sub-nanometer Hg-trap. Mercury atoms are selectively captured, and experience secondary atomization by heating Hg-trap. Flowing oxygen carries mercury atoms into the cold atomic absorption detector (253.7nm) for determination, and the total mercury content in the sample is directly calculated by the software.
Features:Safety FirstDetermine total mercury directly without sample preparation. No hazardous waste produced and no corrosive chemicals used.
Get results in 2-4 minutes. An auto-sampler with as many as 45 sample positions is provided.
Wide Application5E-HGT2321 is able to analyze a variety of sample types including solids and liquid in a wide range of applications.
Just input the sample mass into software and load the sample onto the auto-sampler, 5E-HGT2321 will finish the test automatically.
Minimum Analysis Cost
Compared with the traditional CV-AAS mercury analysis techniques, 5E-HGT2321 saves more than 70% in cost for customers.
All the quartz tubes can be heated, which could effectively remove moisture and eliminate the memory effect of residual mercury.
|Model||5E-HGT2321 Direct Mercury Analyzer|
|Conforms to Method||US/EPA 7473, ASTM D6722|
|Principle||Sample Thermal Decomposition, Atomic Absorption|
|Instrument control||External PC computer system|
|Sample types||Liquid, Solid|
|Max. Sample Volume (Liquid)*||1500 µl|
|Max. Sample Weight (Solid)*||1500 mg|
|Light Source||Low pressure mercury lamp|
|Hg wavelength||253.7 nm|
|Detectors||UV enhanced photodiodes (2)|
|Number of samples||45 with small or large boats|
|Detection limit||0.0005 ng Hg|
|Working Range||Automatic scale change / Dynamic range 0.005ng -1500 ng Hg|
|Repeatability||<1 % (1ng Hg)|
|Typical Analysis Time||2-4mins|
| Sample treatment
| Adjustable from
|Calibration||Standard solution or CRM|
|Number of standards||Minimum 2 (blank & high), maximum 33|
|Peak (W) -Energy consumption||<3000W|
|Standby (W)-Energy consumption||<100W|
|Power Supply||AC110/220V, 50/60Hz|
|Dimensions (L x W x H)||590mmx460mmx330 mm|
|*Depend on different sample density|